Engine
Our engine, a Volvo Penta MD19 (which is very similar to a Volvo Penta MD21) hadn't been started in 10 years when we bought our boat. In this category you will be able to follow our work as we do a full service of the engine. We have done almost all of the work ourselves. List of posts in the category ( with oldest first):
- Problem starting the engine
- Cleaning the engine with EcoPar diesel
- Lift the engine out of the boat
- Teardown of Volvo Penta MD19 (outer parts)
- Disassembling internal parts of Volvo Penta engine
- Cleaning the engine parts and first layer of paint
- Finding spare parts for Volvo Penta MD19
- Assembling the engine (Part One)
- Diesel injection pump renovation and assembling engine parts (part two)
- First start after service (and circulation pump renovation)
- Volvo Penta Heat Exchanger Renovation
- Gearbox renovation and crankcase ventilation solution
- Before and After – Volvo Penta Renovation
- Cost for Volvo Penta renovation
- Lifting the engine back into the boat
- Installing our Volvo Penta engine
- First drive after Volvo Penta renovation
- Easter tour and boatwork
- Electrical installation for the engine
- Alternator charges with too high voltage
- Engine problems at Vejrø
- Stuck at Vejrø with a broken engine
- Motor problems and a windy sail from SVG to Dominica
-
Assembling Volvo Penta MD19 (Part One)
After we had cleaned all the parts of our engine and all the new spare parts had arrived it was time to start assembling our Volvo Penta MD19 engine. During the whole process of assembling
-
Finding spare parts for Volvo Penta MD19
In this blog post we will share where we found the spare parts for our Volvo Penta MD19 (which is very similar to Volvo Penta MD21). Some of the spare parts were really hard to find, so hopefully this will help someone.
-
Cleaning the engine parts and first layer of paint
When we were finished with the teardown of the engine, it was time to start cleaning the engine parts. The inside of the engine was full of old engine oil
-
Disassembling internal parts of Volvo Penta engine
When we had removed the outer parts we started disassembling the internal parts of out Volvo Penta MD19 engine. If you want to read more about
-
Teardown of Volvo Penta MD19 (outer parts)
We were now ready to start the teardown of our Volvo Penta MD19 Engine (which is very similar to MD21). Our best friend during the teardown